Right Seal, Replacing: Installing
WARNING: This page is about a different car, the 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Lightly oil the outer edge of the new seal.
-- Drive in the seal all the way without tilting using the Seal Installer - Flange Shaft :T40163 .
-- Fill the space between the sealing lip and the dust lip halfway with Sealing Grease.
-- Install the right flange shaft. Refer to RIGHT FLANGE SHAFT, REMOVING AND INSTALLING .