All-Wheel Drive Clutch, Removing And Installing: Installing
WARNING: This page is about a different car, the 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Check the O-ring -1- on the all-wheel drive clutch input shaft -2- for damage and if necessary replace.
-- Apply a thin layer of Sealing Grease on the splines of the all-wheel drive clutch input shaft.
-- Place the all-wheel drive clutch -1- on the transmission and tighten the bolts -arrows- hand-tight.
-- Tighten the bolts -arrows- diagonally to the tightening specification.