Left Effects Speaker -R209- /Right Effects Speaker -R210-, REMOVING AND INSTALLING, A6 SEDAN, 9VS: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.
-- Remove the speaker trim -1- from the rear shelf using the Trim Removal Wedge:3409 .
-- Lift the speaker trim -1- until the connector on the Left Effects Speaker -R209- is accessible.
-- Release and disconnect the connector from the Left Effects Speaker -R209-.
-- Remove the speaker trim -1- with the Left Effects Speaker -R209-.
-- Remove the screws -2- from the Left Effects Speaker -R209- -1-.
-- Remove the Left Effects Speaker -R209- -1- from the speaker trim.