Center Speaker 2 -R219-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.
-- Remove the center speaker trim. Refer to OVERVIEW - INSTRUMENT PANEL .
-- Press the tabs -arrows- on the Center Speaker 2 -R219- -1- and remove the Center Speaker 2 -R219- -1- upward.
-- Release and disconnect the connector from the Center Speaker 2 -R219- -1-.