LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 259 (Communication) >> 91 Communication >> Antenna Systems >> Antenna Amplifier, Removing And Installing >> Antenna Amplifiers -R24- / -R111- / -R83- / -R84-, Removing And Installing, A6 Sedan >> Removing

Antenna Amplifiers -R24- / -R111- / -R83- / -R84-, Removing And Installing, A6 Sedan: Removing

WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.

-- Remove the D-pillar trim panel. Refer to D-PILLAR TRIM PANEL, REMOVING AND INSTALLING .

-- Release and disconnect the connectors -2 and 5- from the antenna amplifier -1-.

Fig 1: Identifying Antenna Amplifier -R124- /Antenna Amplifier 4 -R113-
GWWA91-11765Courtesy of AUDI OF AMERICA, LLC

-- Loosen the screw -3- several turns and remove the antenna amplifier -1- from the D-pillar -4-.