Antenna Amplifier 3 -R112-, REMOVING AND INSTALLING, A6 AVANT: Installing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Engage the Antenna Amplifier 3 -R112- -1- first on the left and then the right in the direction of -arrow- into the openings and then tighten.
 Courtesy of AUDI OF AMERICA, LLC
|
-- Insert and lock the connectors.