Overview - Heat EXCHANGER For Heat Pump Operation
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Heater Core for Heat Pump Operation with Refrigerant Receiver
- Bolts
- Tightening specification -item ) Bolts-.
- Bracket
- Overview. Refer to OVERVIEW - HEAT PUMP VALVE UNIT .
- Bracket
- Installed depending on vehicle equipment
- Overview - Heat Pump Valve Unit 4-valve block. Refer to Heat Pump Valve Unit 4-Valve Block .
- Refrigerant Receiver
- Removing and Installing. Refer to REFRIGERANT RECEIVER, REMOVING AND INSTALLING .
- O-Ring
- Replace after removing. Refer to REFRIGERANT CIRCUIT SEALS .
- Lubricate lightly with refrigerant oil before installing
- Bolt
- 8 Nm
- Heat Exchanger for Heat Pump Operation
- Removing and Installing. Refer to HEATER CORE FOR HEAT PUMP OPERATION WITH REFRIGERANT RECEIVER, REMOVING AND INSTALLING .
- Bolts
- 8 Nm