HEATER AND A/C UNIT IDENTIFICATION, MAHLE "Version 2"
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
At the start of production for this vehicle, only the heater and A/C units manufactured by "Mahle" "version 1" were installed. Other versions of heater and A/C units from the same or other manufacturers can also be installed later on this vehicle (for example, "Mahle" "version 2", introduction TBD).
- The sticker manufacturer -1- is visible on the heater and A/C unit -2- after removing the glove compartment. Refer to GLOVE COMPARTMENT, REMOVING AND INSTALLING
.
- Adjustment motors -3- with closed shaft -4- on the heater and A/C unit.