Upper Center Cushion, Removing And Installing, Q3: Removing

WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Move the front seats all the way forward.

-- Position the rear seat all the way toward the rear.

-- Fold the pass-through slightly forward.

-- Remove the center headrest. Refer to HEADREST, REMOVING AND INSTALLING .

-- Remove the center backrest headrest guides. Refer to HEADREST GUIDE, REMOVING AND INSTALLING .

-- Remove the locking mechanism trim. Refer to LOCKING MECHANISM TRIM, REMOVING AND INSTALLING .

-- Use a flat-head screwdriver to pry out the upper and side clamping strips -1, 2 and 4- from the backrest frame starting at the corners -arrows- and remove.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the clamping strips -1 and 4- for the cover from the rear seat backrest locking mechanism -2-.

Courtesy of AUDI OF AMERICA, LLC

-- Fold the pass-through back.

-- Fold the center armrest downward.

-- Remove the cover near the upper center cushion from the backrest frame forward and remove the center cushion.