Lower Center Cushion, Removing And Installing, Q3: Installing
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Flip the protective strip -1- over 180° toward the inside in direction of -arrow A-.
-- Engage the protective strip in the groove on the backrest frame in direction of -arrow B-.
- Press the clamping strips back on until it engages audibly.