Seat Depth Adjuster Heating Element, Removing And Installing
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
The old seat heating element remains on the cushion and will be covered by the new heating element.
Procedure
- Seat depth adjuster cushion removed. Refer to SEAT DEPTH ADJUSTER CUSHION, REMOVING AND INSTALLING .
-- Cut the wire directly on the old heating element.
-- Align the new heating element -arrow- on the cushion.
-- Peel the protective film off the heating element. Be careful not to damage the heating element.
-- Glue the heating element so that it aligns with the old heating element and is not wrinkled.
Further installation is performed in reverse order of the removal.