Seat Depth Adjuster Cushion, Removing And Installing, Q3: Removing

WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Move the front seat all the way to the rear in its highest position.

-- Move seat depth adjuster forward.

-- Equipped on some models: remove the fire extinguisher from the mount.

-- Equipped on some models: disconnect the connector -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Release the hooks -arrows- with a flat-head screwdriver and fold the cushion with cover toward the rear.

-- Disengage the tabs -arrows- from the seat depth adjuster -2- and move the cushion and cover upward.

Courtesy of AUDI OF AMERICA, LLC

-- To do this, remove the seat depth adjuster cushion -1- upward and toward the front.

-- Unclip the clamping strips -2- from the tabs -5-.

Fig 1: Identifying Cover -1-, Channels -2-, Seat Depth Adjuster Cushion -3-, Tabs -4- & Catches -5-

Courtesy of AUDI OF AMERICA, LLC

-- Disengage the cover from the retainers -4- on both sides.

-- Remove the seat depth adjuster cushion -3- from the cover -1-.