Right Front ABS Wheel Speed Sensor -G45- /Left Front ABS Wheel Speed Sensor -G47-, REMOVING AND INSTALLING: Installing
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal while noting the following:
-- Clean the inner surface of the hole before inserting the speed sensor.
-- Insert the speed sensor all the way by hand and tighten.
-- After installing, turn the steering all the way to the left and right, to make sure the speed sensor wiring has sufficient clearance.