Seat Pan Seat Bolster Cushion, Removing And Installing, Super Sport Seat: Installing

WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

WARNING:

Repairing pyrotechnic components (for example the airbag and seat belt tensioner) incorrectly increases the risk of unintentional deployments when the battery is connected.

Pay attention to the safety precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS WHEN WORKING WITH PYROTECHNIC COMPONENTS .
Before handling pyrotechnic components (for example, connecting a connector), the person handling it must "discharge static electricity". For example, this can be done by briefly touching the door striker.
Follow all the instructions when installing the front seat. Refer to FRONT SEAT, REMOVING AND INSTALLING .

Install in the reverse order of removal while noting the following:

-- Equipment versions with seat heating: apply a new heating element when replacing the cushion. Refer to SEAT HEATING ELEMENT, REMOVING AND INSTALLING, SEAT BOLSTERS .