Seat Depth Adjuster Seat Cushion, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the front seat trim. Refer to FRONT SEAT TRIM, REMOVING AND INSTALLING .

-- Disconnect the connector -1-.

-- Release the hooks -arrows-, and fold the retaining plate with cushion and cover toward the rear.

-- Disengage the tabs -arrows- from the seat depth adjuster -2- and move the support with cushion and cover upward.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the support -1- with cushion and cover for the seat depth adjuster upward and forward at the same time.

-- Remove the retaining channel -2- from the retainers -5-.

Fig 1: Identifying Cover -1-, Channels -2-, Seat Depth Adjuster Cushion -3-, Tabs -4- & Catches -5-

Courtesy of AUDI OF AMERICA, LLC

-- Disengage the cover from the retainers -4- on both sides.

-- Remove the seat depth adjuster seat cushion -3- from the cover -1-.