Seat Heating Element, Removing And Installing, Seat Cushion

WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

The old heating elements remain on the cushion and will be covered over by the new heating elements.

Procedure

Cover and cushion separated. Refer to SEAT PAN COVER AND CUSHION, SEPARATING .

-- Clip the wires directly at the heating elements.

Standard/Bucket Seat:

Courtesy of AUDI OF AMERICA, LLC

-- Align the new heating elements -arrow- on the cushion (example image).

-- Remove the protective films from the heating elements in succession, taking care not to damage the heating elements.

-- Glue the heating elements so that they align with the old heating elements and are free of wrinkles.

-- Route the connecting wires to the individual heating elements in the base of the gaps.

Sport Seat:

Courtesy of AUDI OF AMERICA, LLC

-- Align the new heating elements -arrow- on the cushion.

-- Remove the protective films from the heating elements in succession, taking care not to damage the heating elements.

-- Glue the heating elements so that they align with the old heating elements and are free of wrinkles.

-- Route the connecting wires to the individual heating elements in the base of the gaps.

Super Sport Seat:

Courtesy of AUDI OF AMERICA, LLC

-- Align the new heating elements -arrow- on the cushion.

-- Remove the protective films from the heating elements in succession, taking care not to damage the heating elements.

-- Glue the heating elements so that they align with the old heating elements and are free of wrinkles.

-- Route the connecting wires to the individual heating elements in the base of the gaps.

Further installation is performed in reverse order of the removal.