Backrest Cover And Cushion, Separating: Removing
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the cover and cushion. Refer to BACKREST COVER AND CUSHION, REMOVING AND INSTALLING .
-- Bucket seat: remove the tensioning strap for the cover from the cushion.
-- Pull off the cover -3- from the cushion -2- as far as possible and cut upholstery clips -1- using pliers.
NOTE:
The Sport seat is shown.