Overview - Rear Seat Backrest, Folding Backrest

WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Rear Seat Backrest, 3-Person Rear Seat

Courtesy of AUDI OF AMERICA, LLC

Release Cable
- For remote backrest release
Nut
- 9 Nm
Side Cushion
- Removing and installing. Refer to SIDE CUSHION, REMOVING AND INSTALLING .
Outer Bearing Sleeve
- Removing and installing. Refer to OUTER BEARING SLEEVE, REMOVING AND INSTALLING .
Right Folding Backrest with Center Folding Backrest
- Removing and installing. Refer to REAR SEAT BACKREST, REMOVING AND INSTALLING, OUTER FOLDING BACKREST .
Bolt
- 8 Nm
Securing Bracket
- for the center bracket
- Removing and installing. Refer to CENTER BRACKET, REMOVING AND INSTALLING .
Center Support
- Removing and installing. Refer to CENTER BRACKET, REMOVING AND INSTALLING .
Bolt
- Quantity: 4
- 20 Nm
Mounting Pin
- Removing and installing. Refer to INNER MOUNTING PIN, REMOVING AND INSTALLING .
- 15 Nm
Inner Bearing Sleeve