Seat Height Adjustment Handle, Removing And Installing, Bucket Seat: Removing
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
-- Pull the seat height adjustment handle -1- upward and hold in this position.
-- Guide the commercially available screwdriver between the handle -1- and seat trim panel -2- up to the clip -3-.
-- Press down the clamp hooks -3- using the screwdriver.
-- Remove the seat height adjustment handle -1- in -direction of the arrow- from the seat height adjustment lever -4-.
-- To remove the seat height adjustment operating lever -1-, emove the seat frame trim panel on the side sill side. Refer to SEAT SIDE TRIM ON SIDE SILL SIDE, REMOVING AND INSTALLING, BUCKET SEAT .
-- Seat Frame Trim Panel Bracket, Removing:
-- Remove the bolts -2- and remove the operating lever.