Overview - Front Backrest, Lumbar Support
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
- Electro-Mechanical Lumbar Support
- Manufactured by Brose
- Removing and installing. Refer to LUMBAR SUPPORT ADJUSTMENT MOTORS -V125- / -V126- / -V129- / -V130-, EMOVING AND INSTALLING .
- Electro-Mechanical Lumbar Support
- Manufactured by Schukra
- Removing and installing. Refer to LUMBAR SUPPORT ADJUSTMENT MOTORS -V125- / -V126- / -V129- / -V130-, EMOVING AND INSTALLING .
- Fixed Lumbar Support
- No motors
- Equipped on some models: power backrest adjustment without lumbar support
- Removing and installing. Refer to LUMBAR SUPPORT ADJUSTMENT MOTORS -V125- / -V126- / -V129- / -V130-, EMOVING AND INSTALLING .
- Tension Springs
- For spring mat
- Note the different lengths
- Spring Mat
- Equipped on some models: manual backrest adjustment without lumbar support
- Removing and installing. Refer to SPRING MAT, REMOVING AND INSTALLING .
- Backrest
- There are different versions. Refer to the Parts Information.
- Removing and installing. Refer to FRONT BACKREST, REMOVING AND INSTALLING .
- Backrest Cover
- Bucket seat version OVERVIEW - BACKREST COVER AND CUSHION, BUCKET SEAT .
- Removing and Installing:
- Standard/Sport seat. Refer to BACKREST COVER, REMOVING AND INSTALLING, STANDARD/SPORT SEAT .
- Super sport seat. Refer to BACKREST COVER, REMOVING AND INSTALLING, SUPER-SPORT SEAT .
- Bucket seat. Refer to BACKREST COVER, REMOVING AND INSTALLING, BUCKET SEAT .
- Make sure it is engaged properly after installing
- Tension Springs
- For spring mat
- Note the different lengths
- Bolt
- Quantity: 4
- Self-locking
- Replace after removing
- Threaded holes for the bolts must be cleaned, for example, with a thread tap
- 33 Nm
- Pneumatic Lumbar Support
- Removing and installing. Refer to LUMBAR SUPPORT AIR CUSHION, REMOVING AND INSTALLING .
- Bolt
- Tightening Specification. Refer to ) OVERVIEW - PNEUMATIC SYSTEM.
- Rivet