Lumbar Support Adjustment Motors -V125- / -V126- / -V129- / -V130-, EMOVING And Installing: Installing

WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

WARNING:

Risk of injury due to involuntary deployment.

Pay attention to the safety precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS WHEN WORKING WITH PYROTECHNIC COMPONENTS .
Before handling pyrotechnic components (for example, connecting a connector), the person handling it must "discharge static electricity".For example, this can be done by briefly touching the door striker.
Follow all the instructions when installing the front seat. Refer to FRONT SEAT, REMOVING AND INSTALLING .

-- Engage the lumbar support -1- at the top of the backrest frame -2- -arrows-, ilt the bottom toward the rear and insert it in the backrest frame.

Courtesy of AUDI OF AMERICA, LLC

-- Rivet the lumbar support to the backrest frame.

Further installation is performed in reverse order of the removal.