Driver And Front Passenger Seat Switch Module -E663- / -E664-, EMOVING And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
-- If installed, carefully unclip the selector shaft -1- from the switch module using the Trim Removal Wedge :3409 .
-- Remove the seat side trim on the side sill side. Refer to SEAT SIDE TRIM ON SIDE SILL SIDE, REMOVING AND INSTALLING, EXCLUDING BUCKET SEAT .
-- Remove the bolts -arrows- and remove the switch module.