Backrest Cover, Removing And Installing, Super-Sport Seat: Removing

WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

-- Move the front seat all the way forward into the lowest position and move the backrest toward the front.

CAUTION:

There is a risk of damaging the side trim.

The side trim can be damaged relatively easily. Counterhold when removing and installing the side trim.

-- Pull the backrest cover and at the same time counterhold the side trim to unclip the backrest cover -2- starting at the top from the side trim -1- -arrows A to D-.

NOTE:

If it is difficult, loosen the catches using the Wedge Set :T10383 .

-- Disengage and remove the backrest cover from the headrest out of the hooks.

Remove the side trim:

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -3-.

NOTE:

If the bolts -3- cannot be unscrewed, loosen the thorax airbag guide plate. Refer to FRONT THORAX AIRBAG WITH IGNITER, REMOVING AND INSTALLING, SUPER SPORT SEAT .

-- Remove the side trim -1- downward from the side bolster -2- -arrow- and remove.

-- Disconnect the connector, to do this press the release.