Backrest Cover, Removing And Installing, Standard Seat, China Version: Removing
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Risk of injuring the hands.
- Wear safety gloves.
-- Reach behind the backrest cover -1- and pull the cover off the backrest frame to the right as shown.
NOTE:
If this is difficult, loosen the side hooks with a Pry Lever :80-200 .
-- Repeat the procedure on the opposite side.
-- Continue to remove the backrest cover and roll it up until the upper hooks detach from the backrest frame.
-- Remove the backrest cover from the backrest -2- upward.