Seat Belt Guide In Rear Seat Backrest, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the rear belt end fitting in the center. Refer to REAR SEAT BELT LATCH, REMOVING AND INSTALLING .
-- Release the catches -1- by inserting a screwdriver from above through the hole in the belt guide.
-- At the same time, unclip the seat belt guide -2- using the Trim Removal Wedge :3409 -arrow-.
-- Thread the belt end fitting out and remove the seat belt guide.