Overview - Driver Side Airbag, Round Version

WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Driver Side Airbag, Round Version

Courtesy of AUDI OF AMERICA, LLC

Wiring Harness
- For the Driver Airbag Igniter -N95- and Driver Airbag Release Valve Igniter -N490-
- Removing and installing. Refer to CONNECTOR ON AIRBAG, REMOVING AND INSTALLING .
Steering Wheel
- Overview. Refer to OVERVIEW - STEERING WHEEL .
Steering Column Electronics Control Module -J527-
- Overview. Refer to OVERVIEW - STEERING COLUMN SWITCH MODULE .
Bolt
- Tightening specification. Refer to OVERVIEW - STEERING WHEEL .
Driver Side Airbag
- with
  - Driver Airbag Igniter -N95-
  - Driver Airbag Release Valve Igniter -N490-
  WARNING:
  Risk of injury due to involuntary deployment.
  - Pay attention to the safety precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS WHEN WORKING WITH PYROTECHNIC COMPONENTS .
- To release, use a T25 TORX screwdriver, approximately 100 mm long
- Removing and installing. Refer to AIRBAG UNIT WITH IGNITER, REMOVING AND INSTALLING, ROUND VERSION .