Glove Compartment Handle, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
-- Insert the Locking Pin (3 pc.):T40011 through an opening on the side of the glove compartment lid to release the hook for the glove compartment handle.
-- At the same time, use the scraper from the Scraper Set Scraper Set:VAS 6845 to unclip the glove compartment handle from the glove compartment lid -1- -arrow- and remove.