Driver Side FOOTWELL Cover, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the driver side instrument panel side cover. Refer to INSTRUMENT PANEL SIDE COVER, REMOVING AND INSTALLING .
-- Remove the instrument panel cover on the driver side. Refer to DRIVER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .
-- Remove the screw -arrow A-.
-- Using a screwdriver, release the retainer -1- and pull the footwell cover on the driver side -2- out of the mount -arrow B- toward the rear.
-- Disengage the diagnostic connection on the footwell cover.
-- Equipped on some models: disconnect the connectors for the footwell lamp, parking aid warning buzzer and the emergency call speaker.
-- Remove the storage compartment if necessary.