Center Armrest Upper Section, Removing And Installing
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Pry Lever:80-200
Removing Version 1
-- Fold the center armrest up.
-- Starting at the back, unclip the cover -1- from the center armrest -arrows- using the Pry Lever:80-200 .
-- Unclip the cover completely and remove it.
-- Remove the bolts -1 and 2-.
-- Disengage the center armrest upper section -3- -arrow- and remove it.
Removing Version 2
-- Fold the center armrest up.
-- Starting at the back, unclip the cover -1- from the center armrest -arrows- using the Pry Lever:80-200 .
-- Unclip the cover completely and remove it.
-- Remove the bolts -1-.
-- Disengage the center armrest upper section -2- -arrow- and remove it.
Installing
Install in reverse order of removal.