Overview - Screen Separator
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
- Screen Separator Mount Trim
- Clip into the rear seat backrest
- Screen Separator Bracket Rubber Grommet
- Slide over the bracket and insert into the trim panel
- Bolt
- 3 each
- 4.5 Nm
- Screen Separator Bracket
- Quantity: 2
- Removing and installing. Refer to SCREEN SEPARATOR BRACKET, REMOVING AND INSTALLING .
- Bolt
- 9 Nm
- Screen Separator Mounting Eye
- Quantity: 4
- Removing and installing. Refer to SCREEN SEPARATOR MOUNTING EYE, REMOVING AND INSTALLING .
- Position the securing tab on the mounting eye in the opening in the body
- Screen Separator
- Guide Rail
- Insert into the mount
- Screen Separator Mount
- Quantity: 2
- Bolted to the rear seat backrest
- Removing and installing. Refer to SCREEN SEPARATOR MOUNT, REMOVING AND INSTALLING .
- Bolt
- 3 each
- Self-locking
- Replace after removing
- Threaded holes for the bolts must be cleaned, for example, with a thread tap
- 9 Nm