EVAP Canister, Removing And Installing, Vehicles Without Tank Leak Diagnosis: Removing
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
-- Observe the safety instructions. Refer to SAFETY PRECAUTIONS .
-- Follow the guidelines for clean working conditions. Refer to GUIDELINES FOR CLEAN WORKING CONDITIONS .
-- Remove the right rear wheel housing liner. Refer to REAR WHEEL HOUSING LINER, REMOVING AND INSTALLING .
-- Disconnect the vent and breather lines -2, 3 and 4-. Disconnect the connector couplings. Refer to CONNECTOR COUPLINGS, DISCONNECTING .
-- If accessible, remove the bolts -arrows- and the EVAP canister -1-.
-- Otherwise remove bolt/nuts -A and B arrows- and remove the bracket with EVAP canister toward the front.