Overview - Front Thorax Airbag

WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Front Thorax Airbag

Courtesy of AUDI OF AMERICA, LLC

Backrest Frame
Front Thorax Airbag
- With
  - Driver Thorax Airbag Igniter -N199-
  - Front Passenger Thorax Airbag Igniter -N200-
- Removing and Installing. Refer to FRONT THORAX AIRBAG WITH IGNITER, REMOVING AND INSTALLING .
Wire
- From Driver Thorax Airbag Igniter -N199- /Front Passenger Thorax Airbag Igniter -N200- directly to the connector station
- Removing and Installing. Refer to FRONT THORAX AIRBAG WIRE, REMOVING AND INSTALLING .
Bolt
- Replace after removing
- Clean the threaded hole for the bolt with a thread tap, for example
- Install with locking compound. Refer to the Electronic Parts Information (ETKA) for the locking compound.
- 10 Nm