Overview - Seat Position Sensor
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- Wiring Harness
- Seat position sensor/passenger occupant detection sensor/seat belt switch
- Clipped in the seat pan
- Black connector, connector station in the vehicle floor under the seat
- Removing and Installing. Refer to SEAT POSITION SENSOR, REMOVING AND INSTALLING .
- Passenger Seat Occupant Detection Sensor -G128-
- For North American Region only
- Only the front passenger side
- Removing and Installing. Refer to Passenger Seat Occupant Detection Sensor -G128-, REMOVING AND INSTALLING .
- Push into the seat pan until they click into place
- Connector Coupling
- For the Seat Belt Latch
- Seat Rail
- Tunnel-side
- Seat Position Sensor
- Driver Seat Position Sensor -G553-
- Front Passenger Seat Position Sensor -G554-
- Shown on the front passenger side
- Removing, installing and adjusting. Refer to SEAT POSITION SENSOR, REMOVING AND INSTALLING
- Check using the.
- Bolt
- 1.6 Nm