Seat Occupant Detection System, Removing And Installing: Notes
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- The seat occupant detection system is only installed in the front passenger seat.
- The service kit for the passenger occupant detection system must always be installed completely.
- This means that the components that belong together from the passenger occupant detection system service kit (Passenger Occupant Detection System Control Module -J706- and the cushion with passenger occupant detection system) must always be installed.
- Interchanging one of the components Passenger Occupant Detection System Control Module -J706- or the cushion with passenger occupant detection system with another vehicle is not permitted.
- Parts included in the service kit. Refer to Electronic Parts Information (ETKA).
Special tools and workshop equipment required
- Pry Lever: 80-200