Rear Seat Belt Guide, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- If equipped, release the catches -2- by inserting a flat-head screwdriver from above through the hole in the belt guide.
-- Release the catches -2 and 3-.
-- At the same time, unclip the seat belt guide -1- upward in the direction of -arrows- using the Trim Removal Wedge: 3409 .
-- Open the gap on the belt guide and thread out the belt.