Outer Rear Belt End Fitting, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the bench seat. Refer to BENCH SEAT/SINGLE SEAT, REMOVING AND INSTALLING .
-- Equipped on some models: remove the side cushion. Refer to OVERVIEW - COVER AND CUSHION .
-- Remove the C-pillar lower trim. Refer to C-PILLAR TRIM PANEL, REMOVING AND INSTALLING .
-- Remove the bolt -1-.
-- Remove the belt end fitting -2-.