LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Passenger Protection, Airbags, Seat Belts) >> 69 Passenger Protection, Airbags, Seat Belts >> Seat Belts >> Outer Rear Belt End Fitting, Removing And Installing >> Installing

Outer Rear Belt End Fitting, Removing And Installing: Installing

WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Position the belt end fitting so that the anti-twist mechanism -arrow- is in the recess of the belt end fitting.

Further installation is performed in reverse order of the removal.

scientia non olet · About LEMON Manuals