Seat Occupant Detection Sensors -G177-, -G178- And -G1010-, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the bench seat. Refer to BENCH SEAT/SINGLE SEAT, REMOVING AND INSTALLING .
-- Place the bench seat on a clean surface.
-- Disconnect the connector -1- for the passenger occupant detection system pressure sensor.
-- Unclip the passenger occupant detection sensor -2- from the seat frame and remove in the direction of -arrow-.