Overview - Driver Side Airbag

WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Driver Side Airbag

Courtesy of AUDI OF AMERICA, LLC

Wiring Harness
- For the Driver Airbag Igniter -N95- and market-specific version Driver Airbag Release Valve Igniter -N490-
- Removing and Installing. Refer to CONNECTOR ON AIRBAG, REMOVING AND INSTALLING .
Steering Column Electronics Control Module -J527-
- With Spiral Spring -F350-
- Overview. Refer to OVERVIEW - STEERING COLUMN SWITCH MODULE .
Steering Wheel
- Overview. Refer to OVERVIEW - STEERING WHEEL .
Bolt
- Tightening specification. Refer to OVERVIEW - STEERING WHEEL .
Driver Side Airbag
- To release use a flat-head screwdriver approximately 100 mm (3.94 in.) long
- Removing and Installing. Refer to AIRBAG UNIT WITH IGNITER, REMOVING AND INSTALLING .