Battery Interrupt Igniter, Removing And Installing: Installing

WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

Make sure the connectors are pushed in all the way and that they engage audibly.

-- Connect the battery ground cable. Refer to BATTERY, DISCONNECTING AND CONNECTING .

-- Check and erase the airbag control module DTC memory because faults can be stored from when the connectors are disconnected. Use the Vehicle Diagnostic Tester.