Sliding Bar Ball, Installing

WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Camshaft Spacer:T40191

Fig 1: Camshaft Spacer T40191
Courtesy of AUDI OF AMERICA, LLC
Protective Eyewear

Installing

Fig 2: Inserting Spring And Ball Into Camshaft

Courtesy of AUDI OF AMERICA, LLC

CAUTION:

Risk of injuring the eyes due to the sliding bar ball springing out.

- Wear protective eyewear.

-- Insert the spring -1- in the camshaft.

-- Place the ball -2- on the spring in the camshaft.

-- Push the ball and spring downward in -direction of arrow A- using the Camshaft Spacer:T40191/1 and hold.

-- Push the sliding bar -3- in the -direction of arrow B-.