Shock Absorber, Removing And Installing: Notes

WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Because of different shock absorber valve systems, only install new shock absorbers from the same manufacturer on both axles, if possible.

Special tools and workshop equipment required

Engine and Gearbox Jack:VAS 6931

Fig 1: Engine and Gearbox Jack VAS6931 or VAG1383A
Courtesy of AUDI OF AMERICA, LLC
Support Device:VAS 6931/1 , not illustrated
Tensioning Strap:T10038

Fig 2: Identifying Tensioning Strap T10038
Courtesy of AUDI OF AMERICA, LLC