Rear Bonded Rubber Bushing For Rear Final Drive, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
-- AWD equipment versions: remove the rear final drive. Refer to FINAL DRIVE, REMOVING AND INSTALLING .
-- Remove the subframe. Refer to SUBFRAME, REMOVING AND INSTALLING .
-- Mount the Puller - Differential Bearing:T40032 and Rear Bushing Tool:T40033 on the bonded rubber bushing and on the subframe as shown.
-- Remove the bonded rubber bushing from the subframe.