Rear Bonded Rubber Bushing For Rear Final Drive, Removing And Installing: Installing
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of AUDI OF AMERICA, LLC
|
-- Install the Puller - Differential Bearing:T40032
and Rear Bushing Tool:T40033
on the bonded rubber bushing and on the subframe, as shown.
-- Install the bonded rubber bushing all the way in the subframe.
Further installation is performed in reverse order of the removal.