Overview - Single Seats, Q3

WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Rear Single Seats, Q3

Courtesy of AUDI OF AMERICA, LLC

Bolt
- 40 Nm
- Quantity: 2
Rear Seat
- Left
- With folding backrest
- Removing and Installing. Refer to BENCH SEAT/SINGLE SEAT, REMOVING AND INSTALLING .
Retainers
- Replace after removing the seat cushion
- To secure the seat cushion
- Quantity: 2
- Clipped into the seat frame
Seat Cushion
- Left
- Removing and Installing. Refer to COVER AND CUSHION, REMOVING AND INSTALLING, Q3 SEAT CUSHION .
Child Seat Anchor Guide
- Removing and Installing. Refer to REAR CHILD SEAT ANCHOR, REMOVING AND INSTALLING .
- Quantity: 2
Child Seat Anchor Cover
- Removing and Installing. Refer to REAR CHILD SEAT ANCHOR, REMOVING AND INSTALLING .
- Quantity: 2
Bolt
- 50 Nm
- Replace after removing
- Quantity: 2
Connector Station
- Behind the sill panel
- Connector Assignment. Refer to the appropriate Wiring Diagram.