Locking Bracket Cover, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Fold the pass-through forward.
-- Unclip the cover -1- using the Trim Removal Wedge: 3409
on the backrest frame in direction of -arrow A-.
Courtesy of AUDI OF AMERICA, LLC
|
-- Disengage the rear cover on the backrest frame in direction of -arrow B- and remove.