Inner Mounting Pin, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the backrest from the center bearing. Refer to REAR SEAT BACKREST, REMOVING AND INSTALLING .
-- Right backrest: unscrew the mounting pin -3- and remove it with the bearing sleeve -2- and washer -1- (if equipped).
-- Left backrest: remove the chafe protection -4-, unscrew the mounting pin -5- and remove it with the bearing sleeve -6-.