Seat Height Adjustment Handle, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Pulling Seat Height Adjustment Handle Up Hold It In That Position

Courtesy of AUDI OF AMERICA, LLC

-- Pull the seat height adjustment handle -1- slightly upward and hold in this position.

-- Remove the seat height adjustment handle as far as possible from the front seat.

-- Guide the T-Handle Hook: 3438 between the seat height adjustment handle and seat frame trim panel -2-.

-- Release the locking tab -3- with the T-Handle Hook: 3438 and remove the seat height adjustment handle at the same time in the direction of -arrow- from the lever.

-- To remove the seat height adjustment operating lever -1-, remove the seat frame trim panel on the side sill side. Refer to SEAT FRAME TRIM PANEL, REMOVING AND INSTALLING, SIDE SILL SIDE .

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -2 and 3- and remove the operating lever.