Seat Depth Adjuster Trim, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Move seat depth adjuster forward.

-- Unscrew the front seat and tip to the rear with the wires attached. Refer to FRONT SEAT, REMOVING AND INSTALLING .

-- If equipped, remove the fire extinguisher mount. Refer to FIRE EXTINGUISHER MOUNT, REMOVING AND INSTALLING .

-- If equipped, remove the storage compartment. Refer to STORAGE COMPARTMENT, REMOVING AND INSTALLING .

-- If equipped, remove the Owner's Manual bracket. Refer to OWNER'S MANUAL BRACKET, REMOVING AND INSTALLING .

-- Push together the tabs in direction of -arrows- on the trim -1- with pliers or release with the Trim Removal Wedge: 3409 .

Courtesy of AUDI OF AMERICA, LLC

-- Disengage the front seat trim -1- downward in direction of -arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- A3: use a flat-head screwdriver to release the hooks -2- in direction of -arrow A- and unclip the seat depth adjuster handle -1- from the handle mount in direction of -B arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- Q3: release the retainer -1- using a flat-head screwdriver and remove the seat depth adjuster handle -2- from the handle mount in direction of -arrow-.

Courtesy of AUDI OF AMERICA, LLC