Seat Angle Adjustment Motor, Removing And Installing, Power Seat Adjustment: Removing
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the front seat into its highest position.
-- Unscrew the front seat and tip to the rear with the wires attached. Refer to FRONT SEAT, REMOVING AND INSTALLING .
-- Remove the bolt -1- for the seat angle adjustment motor adjusting spindle.
-- Release and disconnect the connector -2- from the seat angle adjustment motor.
-- Remove the bolts -4-.
-- Remove the seat angle adjustment motor -3-.